Madrona burl is a valuable and three-dimensional wood: the burl consists of a protruding growth of the log, within which an irregular and energetic growth of the fiber is generated, culminating in the so-called “Burls Eyes”.
The Burls, like the other three-dimensional characteristics that make wood a precious material (figure, pomelé, eyes), are a gift of Nature and cannot be “created” by man.
The dyeing of natural veneers enhances the tridimensionality, and turns the veneer into an iridescent and luminescent surface, like silk or velvet.
Natural wood veneer dyed through all its thickness (ISO 18775)
Family: Ericaceae
Botanical name: Arbutus menziesii
Area of origin: North America
TECHNICAL CHARACTERISTICS
Thickness: 0,50 ± 0,10 mm
Length: between 200 mm and 1000 mm
Width: between 20 mm and 530 mm
Cut: Rorary cut
Density: 0,45 ÷ 0,60 g/cm3
Flexibility: 13560 Mpa
Bending strength: 135 Mpa
Compressive strength: 65 Mpa
Humidity content: <16%
Since the product is made of wood, it is subject to variations in its moisture content depending on the environment in which it is transported, processed, and stored.
Resistance to light: Since TABU veneer is not a finished product, its resistance to light depends on the type of finish applied (chemical type and quantity). For this reason, it is advisable to carry out preventive tests with different types of finishes in order to optimize the performance of the product.
Mechanical characteristics: The mechanical properties of a dyed natural wood veneer are strongly dependent on the type of support used, the bonding method, the type, and the chemical nature of the varnishing cycle. For these reasons, it is advisable to carry out preventive tests considering the intended use, in order to optimize the product performance.
Aesthetical characteristics: Natural wood veneers have a variability in structure due to the very nature of the original tree. The color may show tolerances when compared to a master sample. Furthermore, the final color of the finished product is influenced by the cycle and the chemical nature of the finishing products used.
-280x280.jpg)
